$

Out of stock

The Robird G31 gyro is an affordable, highly sophisticated flybarless controller equipped with the latest 3-axis digital MEMS sensors. The G31 works well on all r/c helis from 250 to 700 size and is easily set up. The G31 is suitable for first-time fbl heli pilots but also includes advanced features which allow the pilot to change the helis response and behaviors as their skill improves

share


$89.99
AUD $89.99
    • G31 has latest MEMS technical sensor, Ultra-stable over temperature & time.
    • Higher resolution.
    • Digital output.
    • Integrated 16bit ADC; 0.092dps/digit.
    • Could config by both PC and transmitter.
    • Governor upgradable.
    • Weights only 11 grams & mesures 34 x 25 x 13.7mm.
    • Safer in vibrating situation, faster pirouette; as it has ±2000°/s measure range.
    • Has higher safety level by suporting 2 single-line receiver at same time.
    • Supports various receivers: standard & most single-line receivers, such as S.Bus, DSM2, DSMX, DSMJ... etc.
    • HV compatib le; 5V/6V/7.2V/8.4V.
    • Supports multi-rotor blades helicopter system.
    • USB on-board.
    • Dual satellite receiver support.

     

     

    • 1 x GYRO G31
    • 1 x RPM sensor
    • 1 x SRx connecter (for single-line receivers)
    • 1 x USB cable
    • 1 x basic wire set
    • 4 x double-side tapes

  • ROBIRD Set Up Manual 

  • Domestic Shipping starts at $15.20 for this item plus $7.00 for each additional item . International Shipping starts at $23.00 for this item plus $5.00 for each additional item. Shipping availability to your country and Total Shipping will be finalized at check out.